How fiberglass sculptures are made

Mar 15, 2023

Leave a message

Design and shape models

FRP sculpture design should consider the characteristics of material technology. FRP crafts are easy to form beautiful streamlined products, highlighting the sense of the times, and the design can adopt circular arc streamlining. Due to the light weight and high strength of FRP, it can produce works with strong dynamic and small support area. Sometimes it is necessary to apply the surface layer after coating, the gel coat has leveling, and it has a certain leveling effect under the action of tension when curing, which is not suitable for fine texture. These should be carefully considered when designing. The original mold can be molded with clay, and after the sculpture is completed, it is naturally dried and the FRP mold can be made.

 

Manufacture of molds

Mold making is the key to molding. Gypsum is often used in mold making, but the strength of gypsum is low and it is easy to deform over time. Molds can be made from silicone rubber and FRP materials. Silicone rubber is in a fluid state before use, with good flow and filling. The elastomer is formed by the crosslinking reaction, which has a large elastic deformation, and the water of the original mold has no effect on the crosslinking reaction. After crosslinking, the silicone rubber has good sealing and does not bond with the original FRP. It is used as the surface layer of FRP mold, which can reproduce the shape of the work with high quality and can be smoothly demolded. However, the crosslink is easy to deform and needs to support the carrier. It is used as a carrier for molds by using the characteristics of FRP easy forming.

 

Molding production method

The hand-lay-up method is adopted, and the design idea is made before production. Start at one end and combine a portion of the paste product. After a part is cured, the mold is combined to continue pasting. Combine as many chunks of units as possible at once. Finally, a unit block is left, which is preformed and glued to the overall sculpture. The parts of the FRP sculpture that are difficult to make, such as the horns, legs, and tails of animals, can be roughly shaped by corresponding metal materials, and then FRP is formed on the material and polished and trimmed. The shape of the sculpture is more complex and should be treated specially. The glass is difficult to lay should be filled with resin first, and then the glass fiber and checkered cloth should be laid. The length of the surface layer should be 10 mm, and the metal skeleton is buried in the sculpture when molding. Improve the rigidity and strength of the sculpture, increase the service life, and finally install it with a metal skeleton.

 

Post-processing methods

On the one hand, post-processing is to trim the local defects of the product and make important surface effects. Commonly used surfaces are imitation copper and imitation bronze.

The handicraft sculptures made of FRP have bright colors, lines and beautiful shapes. It can be made into imitation gold, copper, stone and a variety of effects, showing a clear sense of the times. Good FRP sculpture works should be designed, modeled, formed, and processed to ensure that the quality of all links can be realized.

 

Send Inquiry